Try Before You Buy

Download a free sample of any of our exam questions and answers

  • 24/7 customer support, Secure shopping site
  • Free One year updates to match real exam scenarios
  • If you failed your exam after buying our products we will refund the full amount back to you.

HP HPE0-S22 Exam Questions (Updated 2022) 100% Real Question Answers [Q37-Q62]

Share

HP HPE0-S22 Exam Questions (Updated 2022) 100% Real Question Answers

Pass HP HPE0-S22 Exam Quickly With ExamsTorrent

NEW QUESTION 37
A customer needs a hosted physical desktop solution. Users will run typical oice applications with limited use of some media-rich applications such as Adobe Photoshop.
The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?

  • A. HPEm700
  • B. HPE m710p
  • C. HPE m710
  • D. HPE m400

Answer: B

Explanation:
References:

 

NEW QUESTION 38
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?

  • A. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
  • B. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
  • C. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.
  • D. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.

Answer: C

 

NEW QUESTION 39
A customer's business critical application server, which is managed by HPE OneView, recovered from an automatic ASR reboot. HPE Support requests an Active Health System log.
What should the customer use to access the log while the server is online?

  • A. HPE OneView
  • B. iLO
  • C. UEFI Bios
  • D. Intelligent Provisioning

Answer: B

Explanation:
Explanation

 

NEW QUESTION 40
A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?

  • A. HPE m700
  • B. HPE m710p
  • C. HPE m710
  • D. HPE m400

Answer: A

 

NEW QUESTION 41
A customer needs a live transcoding solution that meets the following requirements:
* Supports thousands of HD streams
* Provides GPU acceleration
* Provides a high density of streams per Watt and rack unit
Which solution should the architect recommend?

  • A. Several HPE Moonshot Systems with m710p cartridges
  • B. Several HPE Apollo 6000 Systems with HPE ProLiant XL230a server nodes
  • C. Several HPE Moonshot Systems with m700 cartridges
  • D. Several HPE Apollo 6000 Systems with HPE ProLiant XL220a server nodes

Answer: A

Explanation:
Explanation

 

NEW QUESTION 42
A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?

  • A. WBEM Providers will be used for any server managed by HPE OneView.
  • B. HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
  • C. The customer can select from different management protocols between SNMP V2 and SNMP VS to match the security requirements.
  • D. All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.

Answer: A

 

NEW QUESTION 43
An architect is designing an HPE Apollo 6000 solution to support an HPC application that is highly parallel and involves a lot of communication between compute nodes. The architect is choosing the FlexibleLOM options for the compute trays.
Which technology should the architect ensure that the trays support?

  • A. Fibre Channel over Ethernet (FCoE)
  • B. iSCSI hardware initiator
  • C. RDMA over Converged Ethernet (RoCE)
  • D. VXLAN offloading

Answer: C

Explanation:
If the customer prefers Ethernet, certain HPE FlexFaric 10GbE adapter can support RDMA over Converged Ethernet (RoCE), which reduces latency" (P83 in HPE Master ASE v4)

 

NEW QUESTION 44
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
135 processors with 4 2.9GHz cares each

4. 32TB RAM

64.8TB local storage on SSDs

Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one- tenth or even one-hundredth of its potential?

  • A. amount of RAM
  • B. number of processors
  • C. amount of local storage on SSDs
  • D. number of cores per processor

Answer: C

 

NEW QUESTION 45
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS.
Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?

  • A. processor and memory
  • B. drive capacity and memory
  • C. drive type (HDD versus SSD) and drive capacity
  • D. adapter bandwidth and processors

Answer: B

 

NEW QUESTION 46
A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies.
Which solution should the architect recommend to help solve these issues?

  • A. HPE Advanced Power Manager
  • B. HPE OneView 2.x
  • C. HPE Insight Remote Support
  • D. HPE Power Advisor

Answer: A

Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3291ENN.pdf

 

NEW QUESTION 47
Which factors must the architect consider to help define an appropriate HPE server solution to meet a customer's needs?

  • A. whether the customer is considering solutions for the New Style of IT, for Security, for
    Big Data, or for Mobility
  • B. the number of users for the application, the IT resources required by the application, which applications can be consolidated, and whether there are any Service Level
    Agreement (SLA) requirements
  • C. the installed base of ProLiant, 3PAR, and ProCurve products, and whether any
    Cloudline opportunities exist at the customer site
  • D. the legacy hardware and software solutions that the customer is currently running, whether the customer is standardized on x86 architectures, and which storage and networking protocols the customer is using

Answer: B

 

NEW QUESTION 48
An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE.
Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?

  • A. HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules
  • B. HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
  • C. HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
  • D. HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules

Answer: B

 

NEW QUESTION 49
A customer requires a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis fully populated with cartridges.
The populated chassis provide the following in total:
- 135 processors with four 2.9GHz cores each
- 4.23TB RAM
- 64.8TB local storage on SSDs
An aspect of the design is under provisioned and is likely to cause performance to degrade to one-tenth or even one-hundredth of its potential.
How can the architect resolve this problem?

  • A. Select different cartridges that provide more processor cores
  • B. Select different cartridges that provide more nodes per cartridge
  • C. Scale the SSD capacity by adding cartridges or selecting higher capacity SSDs
  • D. Scale the memory capacity by selecting higher capacity DIMM's for the cartridges

Answer: C

 

NEW QUESTION 50
A customer needs a server quote for a DL Gen9 server. The requirements are as follows:
- Gen9 technology with internal storage to support 12 drives
- Exchange database capacity of at least 1.2TB
- 512GB of LRDIMM memory
- 10Gbe Ethernet support
The architect is proposing the DL380 Gen9 server to meet this customer's current needs and some near future expansion.
Which component should the architect add to the quote to meet the customer's requirements?

  • A. HPE SAS HBA Controller H244br
  • B. HPE Smart Storage Battery
  • C. HPE PCIe Workload Accelerators
  • D. HPE 12Gb SAS Expander Card

Answer: A

 

NEW QUESTION 51
What is a basic assumption for an architect using the HPE Servers TCO calculator to justify a customer's migration away from a fully depreciated set of hardware?

  • A. By analyzing the project's internal rate of return (IRR), it is possible to determine if the lower IRR will make it more desirable to undertake the project.
  • B. The opportunity costs of not migrating from a legacy environment to an HPE Converged Infrastructure Solution, in terms of IT Efficiency and User Productivity, will always justify the purchase.
  • C. The Net Present Value (NPV) is the difference between the value of the older systems and the cost of the new systems.
  • D. When the customer's older systems are under a support contract, a new system can sometimes pay for itself simply by not renewing the older support contracts.

Answer: C

 

NEW QUESTION 52
Which statement describes the availability metrics for an HPE system's high availability?

  • A. A system with an availability of 99.99% can be expected to be inoperational for 6 minutes or fewer per year.
  • B. A system with an availability of 99.999% will statistically not have an unscheduled downtime of more than 1 hour total in 10 years of operation.
  • C. A system consisting of HPE standard servers with an availability of 99.9999% and a storage with an availability of 99.99% will have a combined availability of 99.99999%.
  • D. All standard HPE servers are designed for 99.9999% availability.

Answer: C

 

NEW QUESTION 53
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs,
Which HPE Server solution will help meet the customer's needs?

  • A. HPE Apollo 4500 System
  • B. HPE Apollo 6000 System
  • C. HPE Superdome X
  • D. HPE BladeSystemc7000 with BL460G Gen9 Servers

Answer: C

Explanation:
References:

 

NEW QUESTION 54
View the Exhibit.


Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?

  • A. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
  • B. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
  • C. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
  • D. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.

Answer: C

 

NEW QUESTION 55
A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?

  • A. how to use SCCM to provide a graphical installation method for new nodes
  • B. how to add an mRCA module to provide a graphical installation method for new nodes
  • C. how to use VSP to provide a graphical installation method for new nodes
  • D. how to use iLO remote console to provide a graphical installation method for new nodes

Answer: B

Explanation:
Explanation
In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.

 

NEW QUESTION 56
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment.
Which solution should the architect propose to protect the customer from this threat?

  • A. Enable Legacy BIOS mode.
  • B. Use Smart Array Controllers.
  • C. Enable UEFI secure boot mode.
  • D. Use encrypted drives.

Answer: C

Explanation:
Explanation/Reference:
Reference http://docs.software.hpe.com/SA/10.51/Content/admin_guide/
SA_10.1x_OS_Installation_SecureBootCapableServers.htm

 

NEW QUESTION 57
An architect finds several vulnerabilities with a customer's digital enterprise that could lead to data loss on a third-party storage system for critical business segments.
Which solution should the architect propose to help the customer to protect their digital enterprise?

  • A. an HPE StoreVirtual solution configured as a secondary node to replicate the critical data on the third- party storage
  • B. an HPE StoreAll solution configured to migrate the critical data to object-based storage
  • C. an HPE 3PAR StoreServ solution configured to peer persistence with the third-party storage to protect the critical data
  • D. an HPE StoreOnce solution configured to take backups of the critical data from the third-party storage

Answer: C

 

NEW QUESTION 58
A customer needs a hosted physical desktop solution. Users will run typical oꢀice applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?

  • A. HPE m710p
  • B. HPE m700
  • C. HPE m710
  • D. HPE m400

Answer: A

Explanation:
Explanation/Reference:
Reference https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html

 

NEW QUESTION 59
An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records.
Which value does the architect need to consider?

  • A. fair market value (FMV)
  • B. net investment value (NIV)
  • C. net book value (NBV)
  • D. total cost of acquisition (TCA)

Answer: C

Explanation:
Explanation/Reference:
Reference https://www.seslisozluk.net/book-value-nedir-ne-demek/

 

NEW QUESTION 60
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each management module to the management network. The customer then informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What should the architect do to meet the customer's needs, while still allowing iLO access to the HPE Apollo Systems?

  • A. Ensure that HPE Advanced Power Manager aggregates iLO acccess, as well as provides other rack and power management benefits.
  • B. Enable the iLO REST API on each HPE ProLiant XL server.
  • C. Have iLO traffic share the same ports as production traffic and inform the data center administrators that they should use VLANs to separate the two types of traffic.
  • D. Add one Innovation Zone module on each chassis to connect to HPE Insight Cluster Management Utility (CMU).

Answer: C

 

NEW QUESTION 61
A customer needs an HPE Apollo 6000 solution and Remote Direct Memory Access (RDMA).
Which network interconnects should the architect recommend for this solution? (Choose two.)

  • A. GbEthernet
  • B. FlexFabric
  • C. 16 Gb Fibre Channel
  • D. 12G SAS
  • E. Infiniband

Answer: A,E

 

NEW QUESTION 62
......

Real HP HPE0-S22 Exam Questions [Updated 2022]: https://troytec.examstorrent.com/HPE0-S22-exam-dumps-torrent.html