Download Veritas VCS-285 Exam Dumps to Pass Exam Easily in 2024

Get 100% Real Free Veritas NetBackup VCS-285 Sample Questions

NEW QUESTION # 73
Which of the following resources can be used to analyze and optimize NetBackup performance?

• A. Veritas NetBackup 10.1 Administrator's Guide, Volume I
• B. Veritas NetBackup Appliance Administrator's Guide: v5.0
• C. All of the above
• D. Veritas NetBackup Deduplication Guide: v10.1

Answer: C

NEW QUESTION # 74
Where can an administrator add or list the service providers for cloud storage?

• A. NetBackup Management > Host Properties > Media Servers > Scalable Storage
• B. NetBackup Management > Host Properties > Master Servers > Cloud Storage
• C. NetBackup Management > Host Properties > Master Servers > Scalable Storage
• D. NetBackup Management > Host Properties > Media Servers > Cloud Storage

Answer: B

NEW QUESTION # 75
What is the Certificate Authority (CA) for NetBackup?

• A. an Appliance Management Server
• B. an OpsCenter Server
• C. a media server
• D. a master server

Answer: D

NEW QUESTION # 76
Which of the following is NOT a way to troubleshoot problems with NetBackup appliances?

• A. Using the Appliance Shell Menu (CLISH)
• B. Contacting Veritas Support
• C. Checking the logs
• D. Using the Appliance Web Console

Answer: A

NEW QUESTION # 77
What can be tuned in NetBackup using the backup policies?

• A. Data buffer parameters
• B. Deduplication options
• C. Backup performance
• D. Host Properties

Answer: C

NEW QUESTION # 78
How can an administrator view the bpbrm log files on an appliance using the NetBackup Appliance Shell Menu (CLISH) interface?

• A. Support > Logs > Browse
• B. Support > Logs > VxLogView
• C. Support > Logs > Upload
• D. Support > Logs > Share

Answer: B

NEW QUESTION # 79
An administrator has a backup policy with the following policy attributes:
3 paths listed in the Backup Selections list
5 clients listed in the Clients list
"Allow multiple data streams" is selected
"Limit jobs per policy" is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to handle the expected jobs?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

NEW QUESTION # 80
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?

• A. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB
• B. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
• C. verify both media servers are set up in the master server host properties in the "Restore Failover" section
• D. in the BAR console, change the "Server to use for backup and restores" setting to mediaB

Answer: C

NEW QUESTION # 81
What are the two types of disk storage that NetBackup supports for backup data?

• A. StandardDisk and PremiumDisk
• B. SimpleDisk and ComplexDisk
• C. BasicDisk and AdvancedDisk
• D. BasicDisk and Media Server Deduplication Pool (MSDP)

Answer: C

NEW QUESTION # 82
Where can an administrator change the Data Buffer on Disk value using the Appliance Web Console?

• A. Manage > Storage
• B. Settings > Network
• C. Manage > Host
• D. Manage > Host > Advanced

Answer: C

NEW QUESTION # 83
Which of the following is true about the NetBackup documentation landing page?

• A. It includes whitepapers, guides, and videos on best practices for NetBackup.
• B. It provides troubleshooting advice for NetBackup users.
• C. It provides a list of available training courses on NetBackup.
• D. It only offers documentation for the latest version of NetBackup.

Answer: A

Explanation:
Explanation
(Explanation: The NetBackup documentation landing page includes a variety of resources, including whitepapers, guides, and videos, on best practices for NetBackup, enabling users to optimize their use of the product.)

NEW QUESTION # 84
An administrator has a media server with four empty disks with the following characteristics:
SSD1, SSD2: High-speed solid-state drives
Disk3, Disk4: Medium-speed hard drives
What is the recommended disk storage configuration using these devices?

• A. place disks in one AdvancedDisk pool with failover configured, in the order: SSD1, SSD2, Disk3, Disk4
• B. place disks in one AdvancedDisk pool with round robin configured
• C. place disks in two AdvancedDisk pools: SSD1 and SSD2 in one pool, and Disk3 and Disk4 in the other pool
• D. place disks in one AdvancedDisk pool with media server load balancing configured

Answer: C

NEW QUESTION # 85
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is greyed out and therefore unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?

• A. enable Collect true image restore information with move detection
• B. create a full backup schedule with Accelerator forced rescan enabled
• C. select a backup destination that supports synthetic backups
• D. create a differential or cumulative incremental backup schedule

Answer: A

NEW QUESTION # 86
What can be configured using the Host Properties in NetBackup 10.1?

• A. Data buffer parameters
• B. Deduplication options
• C. Backup policies
• D. Network connections

Answer: D

NEW QUESTION # 87
Which of the following can be configured using the Appliance Shell Menu (CLISH) and Appliance Web Console?

• A. Deduplication options
• B. Backup policies
• C. Data buffer parameters
• D. Host Properties

Answer: C

NEW QUESTION # 88
What are the two commands that let you monitor NetBackup appliances using Appliance Shell Menu (CLISH)?

• A. Monitor > Logs and Monitor > Reports
• B. All of the above
• C. Monitor > Status and Monitor > Alerts
• D. Monitor > Health and Monitor > Performance

Answer: B

NEW QUESTION # 89
What is the name of the NetBackup feature that lets you classify data based on its importance and manage it differently throughout each stage of its life?

• A. Storage Lifecycle Policies (SLP)
• B. Storage Retention Policies (SRP)
• C. Storage Protection Policies (SPP)
• D. Storage Management Policies (SMP)

Answer: A

NEW QUESTION # 90
A NetBackup appliance is not backing up data as expected. What steps can be taken to troubleshoot the problem?

• A. Check the appliance's logs for errors.
• B. Contact Veritas Support for assistance.
• C. Restart the appliance.
• D. Check the appliance's backup policies.

Answer: A

NEW QUESTION # 91
A backup job is showing the following error message:

Which two actions can an administrator perform to ensure the backup completes successfully? (Choose two.)

• A. assign a specific Storage Unit for that policy
• B. increase the "Maximum concurrent jobs" parameter on the Storage Unit
• C. ensure at least one storage unit is without the On Demand Only option selected
• D. increase the "Limit I/O streams" parameter on the disk volume
• E. increase the Multiplexing value on the Storage Unit

Answer: A,C

NEW QUESTION # 92
What is the name of the feature that lets you define different levels of access and permissions for NetBackup users and groups?

• A. User management (UM)
• B. Security policy (SP)
• C. Access control list (ACL)
• D. Role-based access control (RBAC)

Answer: D

NEW QUESTION # 93
Which of the following is NOT a role that can be assigned in NetBackup RBAC?

• A. Restore administrator
• B. Network administrator
• C. Storage administrator
• D. Backup administrator

Answer: B

NEW QUESTION # 94
Which type of punctuation is used to separate multiple interface name entries in the Network > Show Properties [InterfaceNames] command in the NetBackup Appliance Shell Menu (CLISH)?

• A. space
• B. colon
• C. semicolon
• D. comma

Answer: D

NEW QUESTION # 95
What is the certificate deployment and management behavior when the security level is set to High?

• A. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
• B. Certificates are deployed automatically for all hosts and the Certificate Revocation List (CRL) is refreshed every hour.
• C. Certificates are deployed with a token for all hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
• D. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every hour.

Answer: A

NEW QUESTION # 96
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:

The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully?

• A. Monday at 1:00
• B. Friday at 10:00
• C. Friday at 2:00
• D. Monday at 2:00

Answer: C

NEW QUESTION # 97
A NetBackup catalog has been corrupted. What steps can be taken to recover the catalog?

• A. Recreate the catalog.
• B. Contact Veritas Support for assistance.
• C. All of the above.
• D. Restore the catalog from a backup

Answer: D

NEW QUESTION # 98
......

VCS-285 Study Guide Realistic Verified Dumps: https://troytec.examstorrent.com/VCS-285-exam-dumps-torrent.html